PROGRAMME
This is the programme for the General Assembly. Click here to see the
FIG Congress 2016 web site.
Monday, 02May 2016
Horncastle Arena (HA) and Addington Raceway (AR) - Christchurch,
New Zealand |
Monday 02 May 2016
|
09:00-12:30
13:30-16:00
Plenary Hall, HA
|
General Assembly, First Session
|
Tuesday,
03 May – Tursday, 05 May 2016
FIG 2016 Working Week and exhibition
Horncastle Arena and Addington Raceway - Christchurch, New Zealand
www.fig.net/fig2016 |
Tuesday 3 May
|
14:00-15:30 and 16:00-17:30
Silk room 2, AR
|
Director/Surveyor General Forum,
Chaired by Director General Peter Mersi, LINZ and Anders Sandin,
Lantmäteriet. |
Wednesday 4 May |
12:45-13:30
Concourse Room, HA
(Bring your lunch) |
FIG Task Force on Commission
Structure – open to all FIG members to discuss the proposal
paper presented at the General Assembly session 1. |
Wednesday 4 May
|
14:00-15:30
Silk Room 4
|
Corporate Members Meeting |
Wednesday 04 May
|
17:30-18:30
AR |
Annual Meetings of FIG Commissions |
Thursday 5 May
|
11:00-12:30
Terror of Love Lounge 2, AR
|
FIG Member Associations Forum
This session is reserved for Presidents or Heads of delegation (or
their representatives) of member associations to discuss issues of
their common interest. There will be a possibility to discuss the
proposal on Commission Structure. By invitation only |
Thursday 5 May |
14:00-15:30 Concourse Room, HA |
Academic Members Forum
joint with FAO |
To be announced |
To be announced |
Task Force on Scientific
Journal meeting |
Friday, 06 May 2016 |
Friday
06 May
|
08:30 – 10:30
Concourse Room, HA |
FIG Presidents’ Meeting
This event is convened by the FIG President and is reserved for
Presidents or Heads of delegation of Member Associations (or their
representatives)
By invitation only |
Friday
06 May
|
11:00–12:30
13:30-15:00
Plenary Hall, HA |
General Assembly, Second Session
including Closing Ceremony
Closing ceremony will start immediately after the conclusion of the
General Assembly and will be followed by the Farewell Reception
hosted by the hosts of FIG Working Week 2017, MIL and MAKLI,
Finland.
|
For the full Working Week programme check:
http://www.fig.net/fig2016/program.htm
FIG 39th GENERAL ASSEMBLY
AGENDA
for the meetings to
be held on Monday 2 May 2016
and on Friday 6 May
2016 in the Plenary Hall
at Horncastle Arena, Christchurch, New Zealand
Introduction
This online version of the agenda includes link to all
appendices in .pdf.
IIn addition to this on-line version, the agenda and its
appendices will published as one large .pdf file.
To download only the agenda in Acrobat format
please click here:
Agenda as uploaded on the web site
on 11 March 2016 (pdf, 24 pages)
Agendaupdated per 30 April 2016
(pdf,
Note: Revisions are shown only on the .htm version
of the agenda and marked with colour.
To download the agenda with appendices as one file in
Acrobat format please click here:
Full Agenda incl. full bidding documents
as PDF (317 pages - 25 MB) updated 20 April 2016
Full Agenda excl. full bidding documents (237
pages - 14MB) updated 20 April 2016
Note: Revisions are shown only on the .htm
version of the agenda and marked with colour.
The individual appendix files can be downloaded below under
each item in Acrobat format.
PLEASE NOTE: Based on the decision from 2007 FIG
Office has sent members only the agenda without appendices as a hard copy.
Full agenda with all appendices can be downloaded from this web site. We
encourage you to use the online edition or otherwise to print the .pdf
version.
Changes to the agenda after it was
originally distributed as hard copy to the member associations are marked in
this agenda with colour and date.
List of Agenda Items
Monday, 02 May, 09:00-12:30 and 13:30-16:00
- OPENING PROCEEDINGS
- ROLL CALL
- APPOINTMENT OF TELLERS
- ADOPTION OF THE AGENDA
- ADOPTION OF THE MINUTES OF THE 38th GENERAL ASSEMBLY
- MEMBERSHIP
- PRESIDENT’S REPORT
- COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2015
- REPORTS FROM FIG COMMISSIONS
- REPORTS FROM FIG NETWORKS
- REPORTS FROM THE DIRECTORS OF PERMANENT INSTITUTIONS
2015
- REPORT OF THE PRESIDENT OF THE FIG FOUNDATION
2015-2016
- REPORTS FROM THE FIG TASK FORCES 2015-2016
- CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD
BANK
- LIAISON WITH INTERNATIONAL PROFESSIONAL ORGANISATIONS
- FIG ACCOUNTS FOR 2015 AND AUDITOR’S REPORT AND BUDGETS
2016-2019
- SUBSCRIPTION RATES FOR 2017 AND 2018
- ELECTION OF TWO VICE PRESIDENTS FOR 2017-2020 -
PRESENTATION OF CANDIDATES
- POSTPONEMENT OF ELECTION OF COMMISSION CHAIRS ELECT FOR 2017-2018
- DECISION ON THE VENUE FOR 2019 FIG WORKING WEEK –
PRESENTATION OF CANDIDATES
Friday, 06May, 8:30-10:30 –
Presidents' Meeting (by invitation only)
- FIG PRESIDENTS’ MEETING
Friday, 06 May, 11:00–12:30 and 13:30-15:00
- ROLL CALL
-
MEMBERSHIP
- ELECTION OF TWO FIG VICE PRESIDENTS FOR 2017-2020
- REPORTS FROM COMMISSIONS, NETWORKS, PERMANENT INSTITUTIONS, FIG FOUNDATION,AND
OTHER WORKING WEEK ACTIVITIES (IF ANY)
- FIG TASK FORCES
-
REPORTS FROM ASSOCIATION, AFFILIATE,
ACADEMIC AND CORPORATE MEMBERS FORUM (IF ANY)
- DECISION ON THE VENUE FOR 2020 FIG WORKING
WEEK
- OTHER ISSUES
- REPORT ON THE WORKING WEEK 2019 IN HANOI, VIETNAM
- REPORT ON THE FIG CONGRESS 2018, ISTANBUL,
TURKEY
- REPORT ON THE FIG WORKING WEEK 2017,
HELSINKI, FINLAND
- PRESENTATION OF CERTIFICATES OF
APPRECIATION
CLOSING CEREMONY
Monday 02 May 2016
Monday, 02 May, 09:00-12:30 and 13:30-16:00
Conference Hall – Horncastle Arena
General Assembly, First Session
1. OPENING PROCEEDINGS
President Chryssy Potsiou to open the 39th General Assembly.
2. ROLL CALL
Vice President Rudolf Staiger to take the roll call.
Please note: The roll call will be done for member associations
only. Delegates representing affiliate members, academic members, corporate
members and correspondents as well as honorary presidents and honorary
members will be entered in the records but they shall register before the
meeting starts at the meeting venue to the staff of FIG Office. Member
associations are asked to inform the FIG Office by 04 April 2016
about their attendance, at the same time to submit the names of their
delegate(s) and to inform who their Head of the delegation is, if it is not
the President or Chair. Please use this special link below to inform us
about your delegation.
To register:
https://docs.google.com/forms/d/1cadnqGyWVECt806NSfextw42J-hK2uQ6NKvZDVkBmmU/viewform?usp=send_form
Since only member associations that have paid all their membership fees
to the end of 2015 are allowed to vote at the meeting, a list of member
associations that are not allowed to vote will be published and posted on
the FIG web site 12 April 2016.
Appendix to items 2 & 22:
Roll Call
incl information of member associations that are not allowed to
vote at the General Assembly because of unpaid membership fees for 2015 and
earlier. Updated 20 April 2016
Motion: That members present are recorded in the minutes.
Decision:
3. APPOINTMENT OF TELLERS
The General Assembly shall appoint two persons as tellers for the entire
General Assembly. The tellers will represent the member association hosting
the current (NZIS), Mark Allen and the host of the proceeding following General Assembly
(MIL/MAKLI, Finland) xxxx.
Motion: That the General Assembly appoints a representative from
NZIS and from MIL/MAKLI as tellers for this General Assembly.
Decision:
4. ADOPTION OF THE AGENDA
The Agenda for the General Assembly
was issued as mandated, two months prior the General Assembly on the FIG web
site and also sent to all members.
Motion: That the agenda be adopted.
Decision:
5. ADOPTION OF THE MINUTES OF THE 38th
GENERAL ASSEMBLY
Minutes have been circulated previously.
Appendix to item 5:
Minutes of the General Assembly in Sofia, Bulgaria, May
2015, without appendices.
Motion: That the minutes be adopted as recorded.
Decision:
6. MEMBERSHIP
6.1 Admittance of new Member Associations
FIG Council has received one application for member
association since the 38th General Assembly.
6.1.1 Géographie, Topographie, Hydraulique, Energie et Construction
(GEOTHECO) Uganda MA-10127
Géographie, Topographie, Hydraulique, Energie et Construction (GEOTHECO),
Uganda has applied for association membership. The association was
established in 2008. Their total membership (all categories) is 42.
Géographie, Topographie, Hydraulique, Energie et Construction (GEOTHECO)
fulfills the criteria of FIG Member association.
Appendix to item 6.1.1: Application form
Motion: That the General Assembly admits Géographie, Topographie,
Hydraulique, Energie et Construction (GEOTHECO), Uganda to become a member
association of FIG.
Decision:
6.1.2 The South African Geomatics Institute, SAGI
The South African Geomatics Institute, SAGI,
South Africa has applied for membership. The association was established in
2004. Their total membership (all categories) is 570. SAGI fulfills the
criteria of FIG Member association. There is already a member association
from South Africa, and they have approved the application of SAGI.
Appendix to item 6.1.2:
Motion: That the General Assembly admits The South
African Geomatics Institute, SAGI, South Africa to become a member
association of FIG.
Decision:
6.2 Other Member Association Issues
6.2.1 Reinstallment of Federación Argentina de Agrimensores (FADA)
Argentina, MA-10002
FADA was unfortunately expelled at the General Assembly in 2014 due to
lack of payment. FADA has announced that they would like to return to FIG
and has agreed to pay old arrears together with the 2016 membership fee. FIG
Council has decided to reinstall FADA and to bring this decision forward to
the General Assembly.
Motion: That the General Assembly admits to reinstall Federación
Argentina de Agrimensores (FADA) Argentina as member association.
Decision/Action:
6.2.2 Termination - College of Engineers and Surveyors of Puerto Rico
(MA-10069)
The College of Engineers and Surveyors of Puerto Rico (MA-10069) has
regrettably decided to resign from FIG. FIG Council is thankful that the
College of Engineers and Surveyors of Puerto Rico has cleared all arrears
and there are no outstanding dues. FIG thanks the association for all the
work they have done throughout the years they have been member FIG looks
forward to a time where they will find it fit to rejoin our global
community.
Motion: ThThat the General Assembly notes the resignation of the
College of Engineers and Surveyors of Puerto Rico.
Decision/Action:
6.2.3 Termination - Termination - The Irish Institution of Surveyors,
(Ma-10042)
The Irish Institution of Surveyors has regrettably decided to resign from
FIG, since they have merged with RICS, UK and will be represented through
RICS from now on.
Motion: That the General Assembly notes the resignation of The Irish
Institution of Surveyors
Decision/Action:
6.2.4 Reinstallment of National Order of
Cameroon Surveyors (NOCS) MA-10015
FIG General Assembly had to expel
National Order of Cameroon Surveyors (NOCS) in 2014 due to lack of payments.
Now, FIG Office has received full payments from previous years and for 2016,
and FIG council recommends to General Assembly to reinstall the association
and bring this decision forward to the General Assembly. Motion: That the
General Assembly reinstalls National Order of Cameroon Surveyors (NOCS) and
bring this decision forward to the General Assembly for endorsement.
Decision/Action:
6.3 Expulsion of member associations
Subscriptions of following member associations are more than three years
in arrears:
- Croatian Geodetic Society, Croatia (MA-10020)
- Fiji Institute of Surveyors, Fiji (MA-10028) (are trying to pay)
- Licensed Surveyors Association in Palestine, Palestina (MA-10065)
- Cadastral Surveyors Association Liberia (MA-10119)
The General Assembly has power to expel from the Federation any member
association whose fees are in arrears and shall under normal circumstances
expel any member association whose fees are three years in arrears. (Article
4.3 of the Statutes). The FIG office has sent information to these associations
informing that if their membership fees are still in arrears at the time of
the General Assembly the General Assembly shall expel the above member
associations in Sofia.
FIG Council has discussed the
situation for the Licenced Surveyors Association in Palestine and deem that
Licensed Surveyors Association in Palestine, Palestina to have suspended
status taking their current situation into consideration.
The number of FIG member associations is 104 from 89 countries after
acceptance and before expulsions.
Motion: That the General Assembly expels the:
- Croatian Geodetic Society, Croatia (MA-10020)
- Fiji Institute of Surveyors, Fiji (MA-10028) (are trying to pay)
- Licensed Surveyors Association in Palestine, Palestina (MA-10065)
- Cadastral Surveyors Association Liberia (MA-10119)
If no payment has been received before the General Assembly takes place.
And that
Licensed Surveyors Association in Palestine, Palestina (MA-10065) will be
registered under suspension status for the year 2016.
Decision/Action:
6.3 Suspended status 2016
In accordance with its administrative measures, FIG Council, has deferred
to continue for 2016 the issuance of a membership subscription invoice to
the Order of Syrian Engineers and Architects, OSEA as all efforts to
maintain contact with them has not yielded results, will deem their
membership in suspension giving due consideration to its internal situation.
As reported in the General Assembly 2015, there remain existing sanctions on
Iran, but this might change during 2016. The FIG office in Denmark cannot
for the time being receive payments from Iranian Professional Society of
Surveying Engineers (ISS). Ukrainian Society of Geodesy and Cartography has
also gained suspended status and has not been invoiced for 2016. Again in
accordance with its administrative measures, FIG Council deem their
membership to be in suspension. The situation with these associations will
be reconsidered by Council again in 2017.
Motion: That the General Assembly notes the members with
suspension status.
Decision:
6.5 Other membership issues
6.5.1 Affiliate members
The Council has admitted the following national agencies to become
affiliate members:
- Survey and Land Registration Bureau, Kingdom of Bahrain (AF-20056)
- Cadastral Agency of Bulgaria, Bulgaria (AF-20058)
- The State Land Service of Latvia (AF-20057)
- LINZ – Land Information New Zealand (AF-20059)
- National Mapping and Resource Information
Authority, NAMIRA, Philippines (AF-20060)
- State corporation Government for Citicens- Astana Kazakhstan
(AF-20061)
- Reinstallment: Dubai Municipality (AF-20032) – has returned as
member of FIG and paid all arrears.
The council has expelled the following affiliate members because of
unpaid membership subscriptions:
- ANZLIC, Australia (AF-20001)
- National Land Centre in the Ministry of Natural Resources,
Rwanda (AF-20016)
- Alcaldía Mayor de Bogotá D.C., Colombia (AF-20046)
After these changes the number of Affiliate members is 49 from 46
countries.
6.5.2 Corporate members
- ISQ Portugal (CM-30051, Category F) has resigned
- COWI, Denmark ((CM 30011) has changed their membership to Category
D.
- New member: CM-30060 Beijing Spatial
Corporation
- New member: CM-30061 GeoReference, Engineering Consultants Saudi
Arabia
After these changes the number of corporate members is now 24.
6.4.3 Academic members
FIG Council has admitted the following University to become Academic
member:
- Ghent University Belgium (AC-40141)
- University West, Department of Engineering, Sweden (AC-40142)
- Papua New Guinea University of Technology (AC-40143)
- Polytechnic of Namibia, Department of Land and Property Sciences
(AC-40144)
The Council has expelled following universities because of unpaid
membership subscriptions:
- University of Botswana (AC-40010)
- University of Mines and Technology, Ghana (AC-40030)
- Universiti Teknologi Malaysia, Malaysia (AC-40041)
- Agricultural University of Cracow, Poland (AC-40054)
- University of Puerto Rico, Mayagüez Campus, Puerto Rico (AC-40055)
- Kingston University School of Surveying, United Kingdom (AC-40073)
- University of Prishtina Department of Geodesy, Kosovo (AC-40116)
The number of Academic Members after these changes is 90 from 554
countries.
6.4.4 Correspondents
The number of correspondents is unchanged from 2015, and amounts to one
from Tonga.
Motion: That the General Assembly notes the actions that the
Council has taken with other membership matters.
Decision:
7. PRESIDENT’S REPORT
PPresident Chryssy Potsiou has prepared the President’s report on the
activities of the Federation since the General Assembly in Sofia, Bulgaria
in May 2015
Appendix to item 7:
-
President’s report (to be posted)
Motion: That the General Assembly accepts the President’s report.
Decision:
8. COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2015
Minutes from FIG Member Association Forum 2015 were presented at the
second General Assembly in Sofia, 21 May 2015. The following proposals were
presented to the FIG Council.
- Global Surveyors Day
1.1. Establishment of a Global Surveyors Day, and that there will be a
GA decision in New Zealand. 1.2. Celebrations to be dedicated to a
Surveyor of the Year and a topic from the broad field of surveying
activities. Address to history group to suggest topics, and surveyors
who may support the organisation of the events.
- Improvements in the established relations between the member
states
2.1. Short information for every member association on FIG web site
2.2. Link from FIG web site to the national web site
2.3. Template information in all FIG languages
- Changes and improvements in the management of FIG
3.1. Visibility of the benefits of FIG Membership for the membership of
national association
33.2. FIG should provide support for countries with little experience in
certain survey practices. Professional support and guidelines are needed
for the developing countries and countries in crisis
FIG Council promised to get back to the General Assembly 2016 with a
follow up and status on these issues.
Appendix to item 8:
Minutes from the FIG Member
Association Forum 2015
Motion: That FIG General Assembly notes the update and records its
thanks to the participants of the Member Association Forum 2015 for their
active role in FIG and constructive proposals.
Decision/Action:
9. REPORTS FROM FIG COMMISSIONS
Each Commission Chair has submitted a written report on their Commission
activities since the FIG Working Week in Sofia. These reports include
progress reports of the Commission working groups. Each Commission will hold
a meeting during the Working Week (Wednesday 4 May, 17:30-18:30). Each
Commission will give a short report on Commission activities to the General
Assembly.
Appendices to item 9: Commission reports:
Motion: That the General Assembly adopts the reports of the
Commission Chairs and records its thanks to the chairs and other officers of
the Commissions for their ongoing contributions.
Decision:
10.2 International Institution for the History of Surveying and
Measurement, Permanent Institution of FIG
Mr. Jan de Graeve, Director of the IIHSM has prepared a report on the
IIHSM activities since the General Assembly in Kuala Lumpur. IIHSM will make
a short report to the General Assembly.
Appendix to item 10.2:
Report from the International Institution for the History of Surveying and
Measurement, Permanent Institution of FIG.
Motion: That the General Assembly adopts the report and records
its thanks to the Director and the members of the permanent institution for
their past year’s work and contribution.
Decision:
10. REPORTS FROM FIG NETWORKS
Each Network Chair has submitted a written report on their Network
activities since the FIG Working Week in Sofia. Each Network will give a
short report on the Network activities to the General Assembly.
Appendix to item 10:
Motion:: That the General Assembly adopts the report and records
its thanks to the Chairs and the members of the networks for
their ongoing contributions.
Decision:
11. REPORTS FROM THE DIRECTORS OF PERMANENT
INSTITUTIONS 2015-2016
11.1. International Office of Cadastre and Land Records (Office
International du Cadastre et du Régime Foncier) OICRF
Dr. Christiaan Lemmen, Director of OICRF has prepared a report on the
OICRF activities since the General Assembly in Kuala Lumpur. He will make a
short report to the General Assembly.
Appendix to item 11.1: Report
from the International Office of Cadastre and Land Records (Office
International du Cadastre et du Régime Foncier) OICRF
Motion: That the General Assembly adopts the
report and records its thanks to the members of OICRF for their past year’s
work and contribution.
Decision:
11.2. International Institution for the History of Surveying and
Measurement, Permanent Institution of FIG
Mr. Jan de Graeve, Director of the IIHSM has prepared a report on the
IIHSM activities since the General Assembly in Kuala Lumpur. IIHSM will make
a short report to the General Assembly.
Appendix to item 11.2:
Report from the International
Institution for the History of Surveying and Measurement, Permanent
Institution of FIG
Motion: That the General Assembly adopts the report and
records its thanks to the Director and the members of the permanent
institution for their past year’s work and contribution.
Decision:
12. REPORT OF THE PRESIDENT OF THE FIG FOUNDATION
2015-2016
Mr. John Hohol, President of the FIG Foundation has prepared a report on
the FIG Foundation activities from June 2014 to March 2016. He will make a
short report to the General Assembly.
Appendix to item 12:
Motion:That the General Assembly adopts the
report of the President of the FIG Foundation and records its thanks to the
President and members of the Board of Directors of the FIG Foundation for
their past year’s work.
Decision:
13. REPORTS FROM THE FIG TASK FORCES (2015-2016)
FIG has currently four Task Forces.
13.1. Task Force on Real Property Markets
The Task Force assesses the progress of establishing the real property
markets in the countries with economies in transition. The Task Force is
chaired by Pekka Halme, Finnish Association of Geodetic and Land Surveyors
MIL. A session on Real Property Markets is included in the technical
programme.
Appendix to item 13.1 –
Status Report from the Task
Force
Motion: That the General Assembly adopts the report from the Task
Force and records its thanks to the Chair of the Task Forces and their
members.
Decision:
13.2. Task Force on Corporate Members
The Task Force is established to strengthen the FIG relationship with
corporate members. The Task Force is chaired by John Hohol, National Society
of Professional Surveyors (NSPS) in cooperation with Bryn Fosburgh, Vice
President of Trimble.
Appendix to item 13.2 –
Status Report from the Task
Force (added
20-04-2016)
Motion: That the General Assembly adopts the report from
the Task Force and records its thanks to the Chair of the Task Forces and
their members.
Decision:
13.3. Task Force on Scientific Journal
The Task Force is established to investigate the usefulness and need and
if justified, the steps forward in order to introduce an FIG peer review
Journal (electronic or printed). The Task Force is chaired by Yerach
Doytsher, Association of Licensed Surveyors in Israel (ALSI). Council
expects a final proposal to be presented and adopted the General Assembly
2017. A session is included in the technical programme at the WW2016 where
the FIG Scientific Journal will be discussed and FIG members are encouraged
to participate in this session.
Appendix to item 13.3 –
Status Report from the Task
Force added 30 April 2016
Motion: That the General Assembly adopts the report from
the Task Force, notes the proposed session and time line and records its
thanks to the Chair of the Task Forces and their members.
Decision:
13.4. Task Force on Commission Structure
The Task Force assesses the Commissions and investigates if there is a
need to revise their structure and to provide a proposal on possible
improvements. The Task Force is chaired by Mikael Lilje, Swedish
professionals for the built environment, Samhällsbyggarna.
At the General Assembly under this agenda item there will be a
possibility for discussion of the proposal.
During the conference days of the Working Week Members of FIG will
furthermore have a possibility to discuss the proposal in more details with
the Task Force at:
- Lunch meeting on Wednesday 4 May (grab your lunch
bag and attend at Concourse Room, HA)
- The Member Association Forum on Thursday 5 May
11:00-12:30
A summary of the comments received during the first General Assembly
session and these meetings will be presented at the 2nd General Assembly
session together with a proposal on how to take the Task Force forward. In
the case that there is a general acceptance of the proposal to make any
changes, the Task Force will be asked to finalise their proposal by December
2016 so that it can be included for voting at the 1st General Assembly
session in 2017 in Helsinki. If there is agreement on the proposal without
any changes, it can be brought forward to a vote already in the second
General Assembly 2016. If the general view is against the proposal Council
will note this, and will have to decide after the General Assembly whether
to close the Task Force or to let the Task Force work on a new proposal
based on the comments from the General Assembly if there are clear
indications on how the members see a new structure for the commission work.
Appendix to item 13.4 –
Report/Proposal from
the Task Force
Motion: That the General Assembly:
- records the report/proposal from the Task Force and records its
thanks to the Chair of the Task Forces and their members
- records the organised meetings and possibilities for discussions
- records the proposed working and time schedule for the Task Force
Decision:
14. CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD
BANK
Since the 38th General Assembly, FIG has continued to collaborate with
the World Bank and various agencies and structures within the United
Nations.
Appendix to item 14.1:
Terms of Reference for the Network on Regional Capacity Development.
Motion: That the General Assembly adopts the report on the
co-operation between FIG and the United Nations, its agencies and the World
Bank and records its thanks to all those who have contributed to this
co-operation.
Decision:
15. 11. LIAISON WITH INTERNATIONAL PROFESSIONAL
ORGANISATIONS
TThe Joint Board of Spatial Information Societies JB-GIS was formally
established during the FIG Working Week in Cairo in 2005 and meets annually
during a major conference. The meeting of JB-GIS in 2015 was held in August
2015. FIG has collaborative MoUs with a number of the organizations who are
part of JB-GIS.
FIG has further bilateral agreements of co-operation with several other
international associations like ISM, IFHP, CIB, ION, ICEC, FIABCI, IFHS,
PAIGH and PAQS.
FIG is represented in International Construction Measurement Standard
Coalition by Chair of FIG Commission 10, See Lian Ong who has been appointed
chair of the Standard Setting Committee. FIG is represented in the Trustee
Board by the President.
FIG is represented in International Land Measurement Standard Coalition
by Mr. Maurice Barbieri.
IG Council has furthermore decided to join the Ethics Standard Committee.
FIG is a member of the International Council for Science (ICSU) and
working together with ISO and International Valuation Standards Committee
(IVSC) on standards.
Motion: That the General Assembly records the report on the
liaison with other international associations.
Decision:
16. FIG ACCOUNTS FOR 2015, AUDITOR'S REPORT AND BUDGETS
2016-2019
VVice President Rudolf Staiger will present the report to the General
Assembly. This report includes the auditors report from 2015, official
accounts (income statement 2015) and balance sheet 31 December 2015, a
summary of 2015 accounts, an updated budget for 2016 and proposals for
budgets 2017-2019 and proposal for membership fees for member associations
in 2018.
Appendix to item 16:
Report on Financial Issues (including 2015 accounts and budgets
2016-2019)
Annexes:
Motion: That the General Assembly
- adopts the audited accounts for 2015,
- adopts the Finance Report, and
- adopts budgets for 2016–2019
Decision:
17. SUBSCRIPTION RATES FOR 2017 AND 2018
The General Assembly has to set levels of fees for member associations
two years in advance of the year in which they become payable. Fees are
payable in respect of each individual member up to a maximum of 5,500
members. The membership fee structure was changed in 2009. Membership fees
have been discussed as part of the finance report, appendix to item 16.
TThe 2015 General Assembly approved membership fees for 2017 as follows
under the condition that Council would re-consider at the end of 2016
whether it would be responsible too keep the fee stable.
|
Per capita fee |
Minimum fee |
Maximum fee |
2017 |
€ 4.48 per member
up to a maximum of 5,500 members
Member associations from countries listed by the World Bank as
low-income economies or lower-middle-income economies shall pay
€ 2.24 member up to a maximum of 5,500 members. |
20 members or € 50
(whichever is greater) |
5,500 members (€ 24,640) |
The World Bank lists of the low-income economies and the
lower-middle-income economies are available at:
http://data.worldbank.org/about/country-classifications/country-and-lending-groups
The 2017 subscription fees were kept at the same level as for the years
2012-2015.
Although the budget 2017 shows a deficit and 2018 only a small surplus,
Council is also conscious of the economic condition that members are
operating under and in particular member’s challenges with their national
membership and budgets. Council wishes to respect this as well and both
Council and FIG Office will continue to be prudent in its financial
management. Council therefore proposes after reconsidering that the level of
subscription for member associations for 2017 and also for 2018 to remain at
the same level as in the previous years. Council has initiated a Task Force
to work on how to attract corporate members and the hope is to increase the
fees received by corporate members to limit the deficit or turn it into a
positive result. The current Memorandum of Understanding with Chinese
Society for Surveying, Mapping and Geoinformation, CSSMG on Internships to
the FIG office is another way to provide support to FIG.
Motion: That the General Assembly adopts following membership fees
payable by member associations in 2017 and 2018:
|
Per capita fee |
Minimum fee |
Maximum fee |
2017 and 2018 |
€4.48 per member
up to a maximum of 5,500 members
Member associations from countries listed by the World Bank as
low-income economies or lower-middle-income economies shall pay
€2.24 member up to a maximum of 5,500 members. |
20 members or €50
(whichever is greater) |
5,500 members (€24,640) |
Decision:
18. ELECTION OF TWO VICE PRESIDENTS FOR 2017-2020
– PRESENTATION OF CANDIDATES
FIG Council has received four proposals for the two open posts of FIG
Vice President:
- Yerach Doytsher, Association of Licensed Surveyors in Israel
- Orhan Ercan, Chamber of Surveying and Cadastre Engineers of Turkey
- Sunil Lalloo, Institute of Surveyors of Trinidad and Tobago
- Mikael Lilje, Swedish professionals for the built environment
The profile templates of each candidate are attached to this agenda. In
the first session of the General Assembly each candidate will be given equal
time (not more than 5 minutes) to introduce her/him and make a presentation
focussing on his/her ideas and goals for developing the FIG agenda to the
General Assembly.
The elections will take place at the second session of the General
Assembly by blind votes on Friday 06 May. The elections will take place one
position at a time. If there will be no absolute majority in the first
voting, second vote will be organised between those two candidates that have
most votes.
Appendix to item 18 and 24: Profiles of the candidates:
Motion: That the General Assembly notes the
presentations of the candidates, makes its careful consideration at the
elections during the second session of the General Assembly on the 06 May.
Decision:
19. POSTPONEMENT OF ELECTION OF COMMISSION CHAIRS ELECT
FOR 2017-2018
The General Assembly will normally elect a Chair Elect for each of the
ten FIG Commissions for term of office 1.1.2017-31.12.2018. Under normal
circumstances the elected Chair Elect will be elected as the Chair of the
Commission at the FIG Congress 2018 for the period 2019-2022.
The General Assembly in 2015 appointed a Task Force to evaluate the
current Commission structure and consider if any changes are needed. The
recommendations of the Task Force on the Commission Structure and the
decision of the General Assembly may or may not affect the number of
commissions. Based on this on-going work, respectfully FIG Council has
decided to postpone the election of Chair Elect for the 10 Commissions until
the new structure has been settled or the current structure confirmed by the
General Assembly. Voting for the period 2019 to 2022, for either structure
scenario will take place in 2018 at the latest.
Motion: That the General Assembly:
- notes the decision by FIG Council
- adopts the proposed time frame
Decision:
20. DECISION OF THE VENUE FOR FIG
WORKING WEEK 2020 – PRESENTATION OF CANDIDATES
The FIG Working Weeks are organised by FIG together with a local member
association. FIG will together with the local member association have full
responsibility of the arrangements and of the financial result. This offers
FIG better opportunities in terms of organising events and generating
revenue. Therefore the Council has to ensure that all candidates are aware
of the role of FIG and split of responsibilities for organising the Working
Week. This General Assembly will decide on the host for the 2020 Working
Week.
The FIG Council has received two bids to host the FIG Working Week 2020,
and FIG Council thanks all bidding member associations for their special
engagement and contribution to FIG.
The Council has prepared a desktop summary on the bids and has also
carried out an evaluation together with the FIG Office that will be
presented at the General Assembly. In the summary report the following
considerations, as laid out in the invitation documentation, are described
for comparison:
- Rotation of the conferences (region);
- Country (hosting of earlier FIG events, experience);
- Member association (its activeness, commitment to FIG and the
Working Week, execution ability for local association);
- Supporting organisations (local support to the Working Week,
governmental support, financial support, general support);
- Host city (characteristics and interest from congress programme
point of view, host city attractiveness, host city offerings);
- Venue (price/affordability, location of venue, internet availability
suitability of rooms, size of venue, structure and layout of the venue,
catering, value for money, hotels nearby facilities for exhibition);
- Accessibility (flight connections, several access possibilities,
security, visa issues, air fare to destination);
- Safety and security (political stability, airport safety, city
safety, political stability in the country - rating must be 3 or
higher);
- Proposed dates (must meet FIG requirements, Following FIG statutes,
practical dates, availability of venue, other conferences at the same
time)
- Technical programme (coverage of all FIG Commissions, potential
partners, originality, special ideas);
- Technical tours (coverage of all FIG Commissions, originality, ideas
proposed);
- Social programme (attractiveness and variety, proposals for dinners,
attractiveness of offered dinners, proposals for tours, is the programme
following the overall FIG concept);
- Attendance (expectation of international, regional and local
attendance, realistic number of international and national
participants);
- Finances (estimate of surplus and financial risks, realistic fees
proposed, fees in an acceptable price range, difference between
international and national fees, realistic budget, estimated revenue);
- Sponsorship (estimate sponsorship and exhibition income, proposed
income, how realistic is proposed income, local sponsor offerings,
sponsor interest to conference);
- Why host (reason for hosting);
- Objectives and outcomes (thought through why conference should be
held at destination, difference to other destinations, short term
outcome, long term outcome);
- Suggested theme (thought of possible theme that fits to
local/regional situation);
- Events organised in the past three years (how experienced is the
host in organising events)
- Major events planned in the proposed city (many events might
affect the price level):
- Initiatives for sustainable conference environment (is host city,
venue and local host paying attention to environmental issues);
- New initiatives or activities (originality – but within the overall
FIG concept)
- What legacy to leave locally from the Working Week (with host,
hosting city, for the surveying community)
The summary report will not give a recommendation or a preference to any
candidate but it will provide useful information on each items listed above
and summarise the pros and cons of each candidate to assist the member
association in making their decision. General Assembly must note that,
especially in these past years, the issue of security and financial
viability has come to the fore. The purpose of the evaluation process is to
maintain the continued viability, high standard and quality of the FIG
Working Week.
The Council has considered the bids and has decided to present the
submitted bids to the General Assembly for its decision:
Amsterdam, Netherlands, Geo-Information Netherlands
Interlaken, Switzerland, geosuisse
The General Assembly is recommended to read the summaries and the bids
carefully.
Appendix to item 20 and 28:
Summary Reports on the Bids for FIG 2020 Working Week -
added 20 April 2016
Bidding documents for FIG Working Week
2020:
- Amsterdam, Netherlands, Geo-Information Netherlands
- Interlaken, Switzerland, geosuisse
At the session each candidate will be given the same time (not more than
10 minutes) to make a presentation of their proposal and framework of the
Working Week and their bid. FIG Council will present its evaluation and the
impact on FIG on the various bids.
Decision on the venue of FIG 2020 Working Week will be made at the second
session of the General Assembly on 06 May. The voting will be made by blind
votes.
Motion: That the General Assembly notes the submission, the
summary report, the presentations and FIG’s evaluation of the candidates,
makes its careful consideration and decision during the second session of
the General Assembly on 06 May.
Decision:
Friday 06 May 2016
Friday, 06 May, 08:30-10:30
Concourse Room, Horncastle Arena, Christchurch, New Zealand
Presidents’ Meeting (by invitation only)
21. FIG PRESIDENT'S MEETING
Separate invitation to Presidents of the Member
Associations.
Friday, 06 May, 11:00–12:30 and 13:30-15:00
Hall 3, 7th floor,
National Palace of Culture - Congress Centre Sofia
General Assembly, Second Session and Closing Ceremony
22. ROLL CALL
Vice President Staiger to take the roll call.
Please note:
The roll call will be done for member associations only. Delegates
representing affiliate members, academic members, corporate members and
correspondents as well as honorary presidents and honorary members will be
entered in the records but they shall register before the meeting starts at
the meeting venue to the staff of FIG Office.
Since only member associations that have paid all their membership
fees to the end of 2015 are allowed to vote at the meeting, a list of
member associations that are not allowed to vote will be published and
posted on the FIG web site 12 April 2016.
To be noted that the General Assembly has appointed two
representatives as tellers.
Appendix to items 2 & 22:
Roll Call
incl. information on member
associations that are not allowed to vote at the General Assembly
because of unpaid membership fees for 2015 and earlier -
updated 20 April 2016
Motion: Those members present are recorded in the minutes.
Decision:
23. MEMBERSHIP
The Council will decide on other membership issues, if
any, considered in Christchurch and bring them for the General Assembly for
decision or information as necessary.
Motion: That the General Assembly decides on
the membership issues based on the proposal of the Council.
Decision:
24. ELECTION OF TWO FIG VICE PRESIDENTS FOR 2017-2020
This General Assembly will elect two Vice Presidents for the term of
office 1.1.2017-31.12.2020. The election will take place between:
- Yerach Doytsher, Association of Licensed Surveyors in
Israel
- Orhan Ercan, Chamber of Surveying and Cadastre Engineers
of Turkey
- Sunil Lalloo, Institute of Surveyors of Trinidad and
Tobago
- Mikael Lilje, Swedish professionals for the built
environment
The elections will take place by blind votes following the FIG statutes
and internal rules. The elections will take place one position at a time. If
there will be no absolute majority in the first voting, second vote will be
organised between those two candidates that have most votes.
Motion: This General Assembly elects two Vice
Presidents for the term 2017-2020.
Decision:
25. REPORTS FROM COMMISSIONS, NETWORKS, PERMANENT
INSTITUTIONS, FIG FOUNDATION AND OTHER WORKING WEEK ACTIVITIES (IF ANY)
Commission Officers (ACCO), Commissions, Networks, Permanent
Institutions, FIG Foundation and others will have their annual and other
administrative meetings and technical sessions in Christchurch. They may
report back to the General Assembly on any issues that may need the
endorsement of or are of general interest to the General Assembly. Any other
activities from the Working Week may be reported back to the General
Assembly on any issues that may need the endorsement of or are of general
interest to the General Assembly.
Motion: That the General Assembly records the report(s).
Decision:
26. FIG TASK FORCES
The four Task Forces will have meetings during the Working Week. The Task
Force Chairs may report back to the General Assembly on issues that may need
the endorsement of or are of general interest to the General Assembly.
26.1. Real Property Markets
Motion: That the General Assembly records the report.
Decision:
26.2. FIG Corporate Members
Motion: That the General Assembly records the report.
Decision:
26.3. Scientific Journal
Motion: That the General Assembly:
- records the report
- endorses results from the meeting
- endorses suggested time schedules and action items for the
future work of the Task Forces
Decision:
26.4. Commission Structure
Motion: That the General Assembly:
- records the report
- endorses results from the meetings
- votes on the proposal if possible
- endorses suggested time schedules and action items for the future
work of the Task Forces
Decision:
27. REPORTS FROM ASSOCIATION, AFFILIATE, ACADEMIC AND
CORPORATE MEMBERS FORUM (IF ANY)
During the Working Week there will be Member Association Forum, the
Director General’s/Affiliate Members Forum, Academic Members Forum and
Corporate Members Meeting. They may report back to the General Assembly on
any issues that may need the endorsement of or are of general interest to
the General Assembly.
Motion: That the General Assembly records the report(s).
Decision:
28. DECISION ON THE VENUE FOR 2020 FIG WORKING WEEK
Candidates for FIG 2020 Working Week have made their presentations in the
first session of the General Assembly and FIG Council has presented its
evaluation. The decision will be made between:
- Amsterdam, Netherlands, Geo-Information Netherlands
- Interlaken, Switzerland, geosuisse
The decision will take place by blind votes following the FIG statutes
and internal rules.
Motion: This General Assembly decides the host and venue for FIG
2020 Working Week.
Decision:
29. OTHER ISSUES
Any other issues that the members want to raise for discussion.
Motion: That the discussion will be recorded and the Council will
consider action that will be required.
Decision:
30. REPORT ON THE FIG WORKING WEEK
2019 IN HANOI, VIETNAM
Representatives from the Local Organising Committee from the Vietnam
Association of Geodesy - Cartography - Remote Sensing will give a
presentation on preparations of FIG Working Week 2019.
Motion: That the General Assembly records the report.
Decision:
31. REPORT ON THE FIG CONGRESS 2018 IN ISTANBUL, TURKEY
Co-congress director Orhan Ercan from the Chamber of Surveying Cadastre
Engineers of Turkey will give a presentation on the preparations of FIG
Congress 2018.
Motion: That the General Assembly records the report.
Decision:
32. REPORT ON THE FIG WORKING WEEK 2017 IN HELSINKI,
FINLAND
Co-conference director Pekka Halme and representatives from the Local
Organising Committee from the Finnish Associations MIL and MAKLI will give a
presentation on preparations of FIG Working Week 2017.
Motion: That the General Assembly records the report.
Decision:
33. PRESENTATION OF CERTIFICATES OF APPRECIATION
CLOSING CEREMONY
Data supplied by the FIG Office.
Whilst every effort has been made to ensure that this data
is accurate errors might exist. Requests for updates and corrections should
be emailed to the FIG Office.
|